American Revival Apparel Company

What do you do

  • Hover

    Votes: 3 12.5%
  • Wipe and sit

    Votes: 10 41.7%
  • Birdnest

    Votes: 5 20.8%
  • eww, i'm to uppidy to use a public tiolet

    Votes: 6 25.0%

  • Total voters
    24

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
Ok so here is how i put my OG Galil Stock on my Galil Ace.
1. Get tools
2. Put new stock on
3. All done.

Hope you guys find this helpful.

No really here is how i did it:
1. These are the tools I used and notice i have the KNS delete kit so i was able to loosen the grip a little to provide the shelf needed for the AR Tool to rest on.
The blue thingey is a Secure card holder and i just used the Snap to be my pusher (use what you have).

1.JPG
2.JPG

2. Put blade end of AR tool in the slot between grip and frame and place the Snap carefully on top of the AR tool like this and push up to reveal the snap ring.
I used my pocket knife to pop the C-clip ring off, then just reverse the process to put it back together:

3.JPG
4.JPG

If you do not have a Delete kit you can use a paint stick and Tape it real good to the back of your grip to make the shelf needed to do this process or you can use a C-Clamp on the A2-Style Grip to hold the Paint Stirrer in place.

5.JPG
6.JPG
 
Last edited: