I use the Dillon D-Terminator electronic scale. It works. I use Dillon for all my reloading needs.
Recommendations for a powder scale
- Thread starter jjones
- Start date
I use both digital and balance beam. I generally weigh a half-dozen charges on both to make sure that I am dead on. Then I just check every 20th round with the digital. The reason for checking is that the weight of the powder in the measure tower changes as you reduce the amount. Not too much difference, but can change over a few hundred rounds. When loading .380 or even 9 mm, the powder charges are already so small that any error is noticeable.
If you’re looking for a good balance between accuracy and price, I’d recommend checking out some of the digital powder scales from Scales4U. They have a variety of digital balances that are precise enough for reloading handgun ammo, and a lot of them fall within your $100–$150 range. I’ve personally used a digital scale for my own reloads, and it made a huge difference compared to older mechanical models, the readings are consistent, and it’s much easier to double-check your measurements.
One thing I like about these digital options is that some models are compatible with automated powder dispensers if you decide to upgrade later, but they work perfectly well as standalone units. For your current needs, focusing on accuracy and ease of use is key, and these scales hit that sweet spot without breaking the bank.
One thing I like about these digital options is that some models are compatible with automated powder dispensers if you decide to upgrade later, but they work perfectly well as standalone units. For your current needs, focusing on accuracy and ease of use is key, and these scales hit that sweet spot without breaking the bank.