Pros and Cons of SBR'ing

Faktory 47

dougiemac

Lord of Chaos
Owner
Lifetime Supporter
Aug 26, 2014
3,140
3,695
113
North Georgia
Pro's and Con's of SBR'ing?

PRO: Badass

CON: $200 Tax

PRO: Rids you of stupid "braces"

CON: Can't cross state lines without ATF document approval
 
  • Like
Reactions: Strider12

Cudruln

Turning dollars into pennies.
Lifetime Supporter
Jul 5, 2015
4,337
4,579
113
Rockmart, GA
Zip code
30153
I think the biggest con is the state line issues. Other than that I plan on doing at least one.
 
  • Like
Reactions: Strider12

NWS

Not a hot midget
Administrator
Lifetime Supporter
Mar 24, 2015
2,468
2,489
113
Georgia
Zip code
30172
Honestly unless you are going to suppress it I wouldn't bother.

I never shoot my SBRs unsuppressed and my one SBR I can't suppress I never shoot period.
 

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
Loud as all get out better suppress it.

Never cross state line with a gun anyway so doesn't bother me about that. I always take my boomerang.
 

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
Got a 10.5" AR pistol... with a flaming pig on the end. It's bearable with ear muffs (not doubling up on ear pro). My latest plan is to get the Grunt M from @DoglegArms and permanently pin/weld it to my upper. Provided it's over the 16" length requirement, it's going to be my single stamp AR.
Is that Grunt M 5.5 inches. That would be sweet.
 
  • Like
Reactions: dial1911

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
I think the M is 5" and the Grunt is 6.25" that Exo looks cool but would prolly just be covered with the rail in your build.


Shout Out
@DarthVader is top shelf honest and trustworthy and has tons of knowledge in building rifles. I trust his advice.
 
  • Like
Reactions: dial1911

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
I think the M is 5" and the Grunt is 6.25" that Exo looks cool but would prolly just be covered with the rail in your build.


Shout Out
@DarthVader is top shelf honest and trustworthy and has tons of knowledge in building rifles. I trust his advice.

I appreciate the advice- and like I said- never met the guy, but I can find nothing wrong with what he says. I'm in no hurry to get this build done, so waiting on a new barrel won't matter. I've got a Specwar 5.56 and no real need to hurry up the "short" build. The current 16" carbine does everything I want it to do- aside from bein shorter and more quiet.
 
  • Like
Reactions: Red Dawn

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
pro: gets rid of annoying neighbors at the gun range

con: requires operator-grade hand stop to prevent finger loss
 
  • Like
Reactions: Strider12

DoglegArms

Silencer Dealer of 2015, 2016, 2017
Jul 12, 2015
1,596
660
113
Dallas, GA
www.doglegarms.com
Zip code
30157
Got a 10.5" AR pistol... with a flaming pig on the end. It's bearable with ear muffs (not doubling up on ear pro). My latest plan is to get the Grunt M from @DoglegArms and permanently pin/weld it to my upper. Provided it's over the 16" length requirement, it's going to be my single stamp AR.
It's 5" in length (I still haven't received it. I"ll call them Monday). If you pin the can do you know how you are going to clean the barrel?
 

becausefu

Woodsman
Trusted Trader
Mar 25, 2015
188
112
43
my house
Remember that a barrel is measured to the muzzle when it comes to length, not the shoulder the can would butt against.

A 10.5 is 10" at the shoulder of the threads, would need a 6" can to make it a 1 stamp can.
 

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
Remember that a barrel is measured to the muzzle when it comes to length, not the shoulder the can would butt against.

A 10.5 is 10" at the shoulder of the threads, would need a 6" can to make it a 1 stamp can.
couldn't you always weld a 1/2" piece of metal to the end of the can?

lol
 
  • Like
Reactions: Strider12

NWS

Not a hot midget
Administrator
Lifetime Supporter
Mar 24, 2015
2,468
2,489
113
Georgia
Zip code
30172
Remember that a barrel is measured to the muzzle when it comes to length, not the shoulder the can would butt against.

A 10.5 is 10" at the shoulder of the threads, would need a 6" can to make it a 1 stamp can.


I don't think my 12.5 is 16" with the can attached.
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
It's 5" in length (I still haven't received it. I"ll call them Monday). If you pin the can do you know how you are going to clean the barrel?

Here I go with a half baked plan and someone has to come along and ruin it :) I guess this one is going to need some more thought- I haven't measured the 10.5 from the bolt face yet. If I'm remembering correctly, the NFA barrel length is measured by inserting a rod against the closed bolt to the end of any permanently attached parts.