Jack of all trade cans

Faktory 47

Gunsite Grad

Charter member
Kalash Klub
Lifetime Supporter
Mar 25, 2015
1,104
387
113
Druid Hills & Kennworthstock
Zip code
30152
Since BHO is jacking things up again I guess it's time to get things into the trust before it's too late. Suggestions for a can that can support 9mm - 45acp and one for 5.56 - 7.62. Money IS a factor. Also, any dealers willing to trade cans for guns?
@NWS.@PewPewPewCo

"When you donate to Goodwill you help put people to work"
 

AirOpsMgr

Director of Lavatory Services
Administrator
Lifetime Supporter
Mar 24, 2015
3,775
10,730
4,294,967,295
30354
I can only speak to the Octane 45, does well with .45, 9mm & .22; haven't had a chance to try it with 300 yet. Swapping out the 45 endcap with a 9 endcap is supposed to drop .22 down a couple more decibels, but I couldn't really tell the difference. In any event, I think I'm going to stick with the Octane as my all-around pistol can.

Still not sure if I'll get a rifle can, but thinking about it
 

Gunsite Grad

Charter member
Kalash Klub
Lifetime Supporter
Mar 25, 2015
1,104
387
113
Druid Hills & Kennworthstock
Zip code
30152
I have an Evercore for my 22. Once Ruger replaced my barrel (misthreaded) it's been perfect. Heck, it's always been perfect it was the host that was messed u


"When you donate to Goodwill you help put people to work"
 

Laces_Out_Marino

Tracker
Trusted Trader
Aug 14, 2015
575
181
113
CANTON, GA
Zip code
30115
I can only speak to the Octane 45, does well with .45, 9mm & .22; haven't had a chance to try it with 300 yet. Swapping out the 45 endcap with a 9 endcap is supposed to drop .22 down a couple more decibels, but I couldn't really tell the difference. In any event, I think I'm going to stick with the Octane as my all-around pistol can.

Still not sure if I'll get a rifle can, but thinking about it
So you can use a .45 can for .22? How about the tirant, been eyeing one of those for a while
 

Buckeye76

Frontiersman
Mar 27, 2015
254
144
63
Georgia
I can only speak to the Octane 45, does well with .45, 9mm & .22; haven't had a chance to try it with 300 yet. Swapping out the 45 endcap with a 9 endcap is supposed to drop .22 down a couple more decibels, but I couldn't really tell the difference. In any event, I think I'm going to stick with the Octane as my all-around pistol can.

Still not sure if I'll get a rifle can, but thinking about it

It works great with 300.
 

AirOpsMgr

Director of Lavatory Services
Administrator
Lifetime Supporter
Mar 24, 2015
3,775
10,730
4,294,967,295
30354
So you can use a .45 can for .22? How about the tirant, been eyeing one of those for a while
If it's a user-serviceable can, yes. I shot about 300 rounds of CCI standard velocity through my octane (with 9mm endcap) on an AR with a 22 conversion kit; all you really hear is the rifle action and the bullet striking the target.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
If I hadn't already gone quantity over quality I would take a hard look at the Griffin Optimus.

I have the Octane 9 and have zero complaints. I only snapped it up when I did because Cherokee had them for $379.
 

Gunsite Grad

Charter member
Kalash Klub
Lifetime Supporter
Mar 25, 2015
1,104
387
113
Druid Hills & Kennworthstock
Zip code
30152
If I hadn't already gone quantity over quality I would take a hard look at the Griffin Optimus.

I have the Octane 9 and have zero complaints. I only snapped it up when I did because Cherokee had them for $379.
So the Griffin is top notch?


"When you donate to Goodwill you help put people to work"
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
So the Griffin is top notch?


"When you donate to Goodwill you help put people to work"
If I owned one I could answer that question. I just purchased a Griffin Revolution 45 from @DoglegArms. Seemed like the best choice for me. He could help you here if he wasn't so busy tickling cyber balls on the ODT. If I had it to do over again, I would probably buy that instead of the Octane 9 and .30. would've been about the same money though.
 
  • Like
Reactions: Leshaire

DoglegArms

Silencer Dealer of 2015, 2016, 2017
Jul 12, 2015
1,596
660
113
Dallas, GA
www.doglegarms.com
Zip code
30157
If I owned one I could answer that question. I just purchased a Griffin Revolution 45 from @DoglegArms. Seemed like the best choice for me. He could help you here if he wasn't so busy tickling cyber balls on the ODT. If I had it to do over again, I would probably buy that instead of the Octane 9 and .30. would've been about the same money though.
I go where I'm mentioned. BTW I touching your can as I type...it's nice.
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
Have you checked the local Goodwill?

:)


I don't know about all around- I ended up with a can for basically every caliber. The biggest downfall to the all around can is weight- .22 cans are super light. And the Octane .45HD is a bit bigger than the 9mm cans I've got. And that .30 cal rifle can is a beast compared to a pistol can of any caliber.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Have you checked the local Goodwill?

:)


I don't know about all around- I ended up with a can for basically every caliber. The biggest downfall to the all around can is weight- .22 cans are super light. And the Octane .45HD is a bit bigger than the 9mm cans I've got. And that .30 cal rifle can is a beast compared to a pistol can of any caliber.
I actually went to get the octane .45 to be my one pistol can. On paper the extra weight and length seems insignificant, but in my hand I quickly realized that I would absolutely know the difference when it was hanging off the end of a 9mm. They had the 9 at killer proce so I got it and decided to get the .45 later. There might be more practical options, but I don't regret it by any means.
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
I actually went to get the octane .45 to be my one pistol can. On paper the extra weight and length seems insignificant, but in my hand I quickly realized that I would absolutely know the difference when it was hanging off the end of a 9mm. They had the 9 at killer proce so I got it and decided to get the .45 later. There might be more practical options, but I don't regret it by any means.


You're right about the weight an length. On a G21, it's no big deal. I can imagine it's a big difference on a 9mm.

One other thing I found- my first centerfire can was a Guardian 9. I bought threaded barrels for the G17 and G34 (and G26, but that's another story). There was a huge difference in the G17 vs. the G34. The 34 just felt front heavy as hell. So much so that I never shot it on that pistol. The G17 is much better. And although I don't have a G19, I'm assuming it would be even better.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Looks like a Liberty Mystic X & GA Revolution are in my future


"When you donate to Goodwill you help put people to work"
Sounds like a good combo to me. I've heard good things about the Mystic. I think you could buy pretty much anything anyone has mentioned here and be perfectly happy.
 

T-Roy

Hunter
Jun 24, 2015
70
51
43
Have you seen the new silencerco hybrid thats due out any day? 9mm-45/70. This and a 22 can and you'll have pretty much every gun covered. msrp $999, plus various endcaps/pistons as needed depending what you'll run it on. @DoglegArms you going to have these?

Sent from my SM-G900P using Tapatalk