M16 Copy Cat Build

Preparedness Depot in Acworth, GA

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
I've wanted to put this rifle together for awhile now. So no time like the present. I'm trying to take the best of A1 and A2 put in one rifle. A solid buttstock and triangle handguard a must but the upper will have the brass deflector on it. I'm staying with the 18" barrel instead of 20" with the carry handle sight and front sight gas block going on it. Any thoughts I should be aware of or not forget feel free to share your opinion.

IMG_3863.JPG

Top to bottom: M16A1, M16A2, M4A1, M16A4
 
  • Like
Reactions: Strider12

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
are you going for a clone build - meaning - as close to authentic as possible? or are you ok with some deviations?
 
  • Like
Reactions: Red Dawn

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
are you going for a clone build - meaning - as close to authentic as possible? or are you ok with some deviations?
Some deviations from the true A1 will have to be to meet certain needs
 

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
Finding these parts is gonna be a task too I found a Faxon barrel I like but getting a .625 A2 FS gas block that's gonna fit it well coming up empty right now
 

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
obviously the barrel is a deviation and probably a good one to do. i've always liked the 18" barrel for 556.

i'm guessing you'll have a detachable carry handle vs a true a2 or a c7 (a1 with a deflector and a forward assist) for the rear sight? or were you thinking something more atypical?
 
  • Like
Reactions: Red Dawn

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
obviously the barrel is a deviation and probably a good one to do. i've always liked the 18" barrel for 556.

i'm guessing you'll have a detachable carry handle vs a true a2 or a c7 (a1 with a deflector and a forward assist) for the rear sight? or were you thinking something more atypical?
Yes I'll go with a detach carry handle sight. I'd like to get long range use with it too
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
Finding these parts is gonna be a task too I found a Faxon barrel I like but getting a .625 A2 FS gas block that's gonna fit it well coming up empty right now


I think I have that FSB sitting in a box (only because I like lightweight profile barrels). I'll look for it tomorrow if I remember. And if I don't remember, shoot me a reminder PM or text. You can have it if I can find it. But I'd warn you that the taper pins have already been cut. Taper pins come with it, but you've got to get the barrel cut to match.
 
  • Like
Reactions: Red Dawn

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
I don't know enough about the classics to say which is right/wrong/better/worse... but I can definitely say I like the way you're headed with the build. Looking forward to updates-
I'm learning more about it too


I think I have that FSB sitting in a box (only because I like lightweight profile barrels). I'll look for it tomorrow if I remember. And if I don't remember, shoot me a reminder PM or text. You can have it if I can find it. But I'd warn you that the taper pins have already been cut. Taper pins come with it, but you've got to get the barrel cut to match.
Thanks @dial1911 if you find it I'll contact Faxon or Macon Armory to see about fitting it to the barrel.
 

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
Finding these parts is gonna be a task too I found a Faxon barrel I like but getting a .625 A2 FS gas block that's gonna fit it well coming up empty right now

Yes I'll go with a detach carry handle sight. I'd like to get long range use with it too

Well, a .625 FSB will not line up(zero) with a detachable rear sight. F marked FSBs were not made in .625".
 

Rwjeter

Space Force General Freeze.
Kalash Klub
Lifetime Supporter
Nov 16, 2016
5,354
10,815
113
Temple
Zip code
30179
Honestly I'd like a true A2 upper with the fixed carry handle. I used to have a C7 like @boss_hawg mentioned that I was going to do a 9mm build with. The A2 will give you better long range capabilities though. An A1 or C7 don't have any vertical adjustment on the receiver. Just the different aperatures. All your adjustments have to be with the front sight and I think that will get old. Also,food for thought, the National Match rifles that they shoot to 600 with are actually free float barrels and only LOOK like a service grade A2. I want a NM rifle to take to the CMP so I can try for 600 with irons as well.
 
  • Like
Reactions: Red Dawn

Rwjeter

Space Force General Freeze.
Kalash Klub
Lifetime Supporter
Nov 16, 2016
5,354
10,815
113
Temple
Zip code
30179
Thanks @Rwjeter way to blow the budget build into a precision match rifle with one look. That's a great tube for the handguard I like the idea of isolating tension from the sling.
You're welcome. That's what I'm here for.
 
  • Like
Reactions: Red Dawn