Form 1

Howard Law

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
Ok y’all got me looking again .. quick question on 556 or 6.5G maybe even 308 .. what do you think about cutting baffles step cut like a stair or scoop cut ..... ? Anyone have a opinion on poi shift or sound suppression being better one way or the other. ??

936E16A1-7DB0-41C6-B877-9A6153776B24.jpeg
 

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
Ok y’all got me looking again .. quick question on 556 or 6.5G maybe even 308 .. what do you think about cutting baffles step cut like a stair or scoop cut ..... ? Anyone have a opinion on poi shift or sound suppression being better one way or the other. ??

View attachment 103691
Ive been mulling over this question for a few days now and I feel very confident in my answer. From everything I have read, as long as the baffles are clipped you should have pretty good sound suppression. Be it step, scoop or Double clipping. Basically the scoop on both sides. I think some of the guys offset their baffles as well if it’s clipped like above. For POI I’m not the guy to ask. I’m just stoked if it doesn’t blow up and I can hit something with it.
 

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
Just curious, could you do 2 sets of baffles/end caps, different size holes, with the same tube - 1 suppressor?
No, it’s my understanding you can’t even have extras. Even If you have extra baffles laying around, that are drilled and ready, in the eyes of the ‘bet bois it’s intent to build. Without that sweet, sweet tax money...I mean permission, you will get into some trouble.
 
  • Angry
Reactions: Grunk

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
  • Like
Reactions: Red Dawn

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
I’m trying to stay clear of aluminum baffles just because of cleaning them. Spoiled with a tumbler and stainless media. I use crushed walnut media for aluminum baffles but it takes 2xs as long and still has leftovers. They will never be like new and most sound better with some buildup on them.
 
  • Like
Reactions: roadsignmcclanahan

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
I’m trying to stay clear of aluminum baffles just because of cleaning them. Spoiled with a tumbler and stainless media. I use crushed walnut media for aluminum baffles but it takes 2xs as long and still has leftovers. They will never be like new and most sound better with some buildup on them.
I was stoked when I first saw it...then i started reading, exactly that on aluminum and was like....mmm pass.
 
  • Like
Reactions: Red Dawn

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
@Cameron Shepherd - did you follow progress of your Form1 after you submitted it? What did that entail?
I would get emails about status changes that’s about the extent that I followed. It was Pending research then they sent me an email saying submitted. That’s the one that had the cover letter and form attached. So got all that shipped in and then kinda forgot about it.
 
  • Like
Reactions: Tedkennedy

Tedkennedy

Omnivore
Site Supporter
Kalash Klub
May 17, 2016
2,266
13,609
113
Oklahoma
Zip code
74066
ATF rejected my Form 1 application. Apparently they didn't like the fingerprint cards I used. Submitted new Form 1, will get correct cards....
 
  • Like
Reactions: roadsignmcclanahan

cbh13

Millennial Supreme
Lifetime Supporter
Aug 26, 2016
1,545
6,522
113
Auburn
Zip code
30011
E-file on the atf system. I did mine as individual. Did my own fingerprints, got the ink and sheets from amazon. Pretty simple.

I’ll just be using a drill press, since most the parts are ready center punched and ready to go.

so help me clear this up. You dont have to get finger prints from local police?

Basically i can order everything online to do prints and then fill out all the form 1 stuff online and just send them the prints?

Do you need to know any of the details of the suppressor such as caliber or anything or is just "suppressor" and when your finished do you need to engrave the suppressor? sorry for a ton of questions but know jack shit about this and am really wanting to jump into the suppressor game soon.
 
  • Like
Reactions: roadsignmcclanahan

roadsignmcclanahan

Riding this shit show straight to hell
Aug 13, 2015
580
2,349
113
Cleveland, TN
Zip code
37312
Correct you don't need to get the local police to do your fingerprints. You can order the cards off amazon or even get them from the ATF. Some companies will even sell them to you pre-filled out and all you do is ink them up.

For your form 1 you will need details. Length and caliber for sure. Either while you wait, or when you get the form 1 send the tube off to be engraved. OR even do it yourself.

Solvent traps them selves are legal to own. But I waited until my form 1 was approved to buy anything.