RCBS Chargemaster Lite

Faktory 47

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
I have spent about a month using the Chargemaster Lite for my rifle reloading. The results have been very satisfactory. When using ball powder, it has yet to miss a throw with about 200 loaded at .308/.270 levels. When loading long extruded powder such as IMR 4064 and 4895 for service rifle and hunting loads, about 1 out of 50 goes 1/10 grain high. I have used the tool to load approximately 400 total of 30-06, 7.62x54r, and 30-30. It certainly is a time saver loading different powders not having to change settings on a powder thrower. Even using one powder per thrower, I have discovered some density differences from lot to lot requiring recalibration. Generally I don't use more than 1lb at the time, so the hopper is plenty big for me. It is easy to calibrate and clean out. The negative is that the drain does not lock positively into place, so after draining care must be taken not to pour the new powder out. The Chargemaster Lite gets two thumbs up from old man handloader. I will be sticking with a thrower for my handgun, since it is loaded progressively. However for heavy 310 gas checked flat nose .44 mag loads of Win 296, the RCBS will be getting the nod. This is a tool that I have confidence in, and at the sale price, would make a nice addition to your bench.
 

War Paint

Frontiersman
Nov 23, 2015
347
150
113
Oxford ga
Zip code
30054
Not a bad scale I have used one for years. I have upgraded and now it just sits on the other bench.
 

ReservoirDawg10

Sniper
Site Supporter
Apr 10, 2016
1,655
1,571
113
Gwinnett
Zip code
30519
I throw with a chargemaster and confirm with a gempro. About as good as it gets until you go FX120 and autotrickler
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
I throw with a chargemaster and confirm with a gempro. About as good as it gets until you go FX120 and autotrickler

I used a Gempro for a few years, but only shooting 600 and in service rifle I was the weak point, not my ammunition. The Gempro is a fantastic electronic scale.
 

ReservoirDawg10

Sniper
Site Supporter
Apr 10, 2016
1,655
1,571
113
Gwinnett
Zip code
30519
I used a Gempro for a few years, but only shooting 600 and in service rifle I was the weak point, not my ammunition. The Gempro is a fantastic electronic scale.
Better the shooter the weak point than the gear or ammo. I figure that I know my stuff does what it's supposed to do, therefore, misses ae inadequate performance are me.
 
  • Like
Reactions: Liberty

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
That is what I went to FX120 auto throw and auto trickler. Love that thing

That is a fine rig. Only shooting service rifle and making hunting rounds I can't justify the cost. Especially being in the middle of restoring a trailer, tractor, and a pile of plows, bushing, etc.
 
  • Like
Reactions: Grunk

Rwjeter

Space Force General Freeze.
Kalash Klub
Lifetime Supporter
Nov 16, 2016
5,354
10,815
113
Temple
Zip code
30179
Not a bad scale I have used one for years. I have upgraded and now it just sits on the other bench.
Hey warpaint, do you want to get rid of your chargemaster? I'm trying to slowly upgrade my reloading game.
 
  • Like
Reactions: ReservoirDawg10

War Paint

Frontiersman
Nov 23, 2015
347
150
113
Oxford ga
Zip code
30054
Why Not @Rwjeter Ill take a pic of the model I have to night and post.. Not sure If I have the box. Thinking it's a charge master lite. Not a bad scale.