Stuck Baffles ?

[Red Dawn]

Did you wait to long to clean that suppressor? Looks like this could be a safe fix for removing the baffles if they are carbon stuck. What do u think worth the $50



Baffle Removal Tool

 

[Huddy]

Or some pb blaster, drink 2 beers, then let em fall out on their own...

 

[Red Dawn]

Or some pb blaster, drink 2 beers, then let em fall out on their own...

That’s solid !!

I have waited at least 6/8 months and prolly a 1200/1500 rounds on a rimfire can and they just pop right out. When I clean em I coat it with fireclean and knock on wood I haven’t had this problem but I know some here have.

 

[ReservoirDawg10]

I've never needed anything past a wood dowel.

 

[erkinator 2]

hell , my end cap is stuck,can`t get open

 

[Red Dawn]

hell , my end cap is stuck,can`t get open

Did you try unscrewing while hot too

 

[Allsmiles]

2 foot piece of pvc is what i use for really stubborn baffles as it won't damage baffles or tube.

 

[erkinator 2]

Did you try unscrewing while hot too

yup and even trying the heat,freeze method,its partly unscrewed from shooting then jammed. It did this before and I had to send in.

 

[Allsmiles]

yup and even trying the heat,freeze method,its partly unscrewed from shooting then jammed. It did this before and I had to send in.

Sounds like it is cross threaded. Might want to double check when you get the end cap off.

 

[Laufen]

I've needed a 5/8 socket, extension and a mallet to remove some from a 9mm. The pb blaster, etc etc didn't do squat. This tool might be pretty handy.

 

[erkinator 2]

Sounds like it is cross threaded. Might want to double check when you get the end cap off.

was hand tight when I started shooting,loosened half way out.I noticed when I got home. Would not budge,I do need better tool though

 

[ReservoirDawg10]

was hand tight when I started shooting,loosened half way out.I noticed when I got home. Would not budge,I do need better tool though

What can?

 

[lesptr]

was hand tight when I started shooting,loosened half way out.I noticed when I got home. Would not budge,I DO NEED A BETTER TOOL THOUGH.

That’s what she said.

 

[erkinator 2]

What can?

ARC22 from Dobbs, had already sent back to him once before for same issue, just feel the aluminum is not wuite the best material. WOnder if getting a stainless cap if that would help

 

[ReservoirDawg10]

ARC22 from Dobbs, had already sent back to him once before for same issue, just feel the aluminum is not wuite the best material. WOnder if getting a stainless cap if that would help

Yeah. Not a very well thought out can. I bought 2 without ever seeing one. Rough machine work and cuts in the caps to use a tool can make it difficult.

 

[erkinator 2]

Yeah. Not a very well thought out can. I bought 2 without ever seeing one. Rough machine work and cuts in the caps to use a tool can make it difficult.

that the thing the tool is hard to find good one