Opinions.......Aero Precision?

Howard Law
Laufen

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
Last edited:
Laufen

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
Bypass said:
I bought one of their uppers. I was a top of the line 308 upper. It shot about a pie plate at 100 yards. It was complete rubbish.
Click to expand...
Damn. Ok, thanks for that man. I think I'm going to go with the Troy then. The lack of detail on their barrels did concern me.
 
Last edited:
  • Like
Reactions: Bypass
freedom

freedom

Sniper
Mar 25, 2015
1,522
885
113
Covington, Ga
Zip code
30014
I've built off a Aero stripped upper before. It had a nice finish a perfect fit to the barrel. I'd definitely buy another, but never bought a factory built upper.
 
  • Like
Reactions: Laufen
boss_hawg

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
I've never had any problems with AP parts in a number of my builds. Everything was nice and tight.

Having said that...their barrels have never seemed to be any better or worse compared to other mil spec arrangements. I've never shot these builds from a true 'benchrest' setup but with a bipod at 50 yards, I was getting roughly one inch groups. I would think this would roughly correspond to 2" groups at 100 yards but experts may correct me if I'm wrong. Also, the shooter (me) may have had a bit of a hand (pun intended) in causing deviation from the gold-standard 1 moa. For what it's worth, on the same outing I was putting 6.8 rounds through the same hole with a boutique barrel - though that upper had an optic with greater magnification (9x vs. 6x).

If you are looking for a precision long-range setup, you may want to look for a boutique barrel and matched bolt vs. an AP built upper.

In my ranking system, I put AP on par with PSA as a solid mid-tier mfg in terms of value at a respectable price and reliable function.
 
Laufen

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
boss_hawg said:
I've never had any problems with AP parts in a number of my builds. Everything was nice and tight.

Having said that...their barrels have never seemed to be any better or worse compared to other mil spec arrangements. I've never shot these builds from a true 'benchrest' setup but with a bipod at 50 yards, I was getting roughly one inch groups. I would think this would roughly correspond to 2" groups at 100 yards but experts may correct me if I'm wrong. Also, the shooter (me) may have had a bit of a hand (pun intended) in causing deviation from the gold-standard 1 moa. For what it's worth, on the same outing I was putting 6.8 rounds through the same hole with a boutique barrel - though that upper had an optic with greater magnification (9x vs. 6x).

If you are looking for a precision long-range setup, you may want to look for a boutique barrel and matched bolt vs. an AP built upper.

In my ranking system, I put AP on par with PSA as a solid mid-tier mfg in terms of value at a respectable price and reliable function.
Click to expand...
Yeah, my Spikes was getting sub-moa at 100 without a free floated bbl. We'll see. Shit I'll probably end up selling it in a month.
 
freedom

freedom

Sniper
Mar 25, 2015
1,522
885
113
Covington, Ga
Zip code
30014
You can't expect any milspec type barrel like any CHF or Chrome lined to shoot any better than 2 moa. They are built for high round counts, not precision. You can always get lucky, like you did with the spikes, and happen upon a barrel/round combo that does better.

There's a company called ballistics advantage that has a 1moa guarantee in all their barrels. They are reasonably priced, lower than the higher end milspec barrels you can find like DD and BCM. I haven't built one, but my next will probably come from there.

I build a gun with a Bergara barrel, shoots about 1 moa with PMC, and less than 1/2 with a tuned handload. It cost about $175 from integrity arms.
 
  • Like
Reactions: DarthVader and Strider12
Laufen

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
freedom said:
You can't expect any milspec type barrel like any CHF or Chrome lined to shoot any better than 2 moa. They are built for high round counts, not precision. You can always get lucky, like you did with the spikes, and happen upon a barrel/round combo that does better.

There's a company called ballistics advantage that has a 1moa guarantee in all their barrels. They are reasonably priced, lower than the higher end milspec barrels you can find like DD and BCM. I haven't built one, but my next will probably come from there.

I build a gun with a Bergara barrel, shoots about 1 moa with PMC, and less than 1/2 with a tuned handload. It cost about $175 from integrity arms.
Click to expand...
I'm hoping to get lucky and at least be able to shoot 1 moa with my heavier Hog loads. The spikes groups those around 1.25 at 100.
Honestly, I just like sitting on the bench and shooting. As long as it shoots fairly well I'll be happy. I'm not competing.
 
  • Like
Reactions: dial1911
D

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
Laufen said:
I'm hoping to get lucky and at least be able to shoot 1 moa with my heavier Hog loads. The spikes groups those around 1.25 at 100.
Honestly, I just like sitting on the bench and shooting. As long as it shoots fairly well I'll be happy. I'm not competing.
Click to expand...

My spike's carbine is minute-of-clay-pigeon accurate all day long. I can generally hit the whole ones on the 100 yard berm and then shoot at the pieces awhile longer.
 
  • Like
Reactions: Laufen
Wallace

Wallace

Tracker
Trusted Trader
Mar 26, 2015
828
370
113
Cartersville
Zip code
30145
I have one of their lowers, and its pretty nice. Assembled WAY nicer than the Noveske shit I bought earlier.
 
  • Like
Reactions: Laufen
Woodstock

Woodstock

Tracker
Jun 29, 2015
529
189
113
Zip code
30012
No experience with aero at all, but thats not going to stop me giving a highly valued opinion on them.......
 
DarthVader

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
freedom said:
Yep, but there are people who have waited a lot longer.
Click to expand...
What do you think of that LT trigger?
freedom said:
You can't expect any milspec type barrel like any CHF or Chrome lined to shoot any better than 2 moa. They are built for high round counts, not precision. You can always get lucky, like you did with the spikes, and happen upon a barrel/round combo that does better.

There's a company called ballistics advantage that has a 1moa guarantee in all their barrels. They are reasonably priced, lower than the higher end milspec barrels you can find like DD and BCM. I haven't built one, but my next will probably come from there.

I build a gun with a Bergara barrel, shoots about 1 moa with PMC, and less than 1/2 with a tuned handload. It cost about $175 from integrity arms.
Click to expand...
If I'm not mistaken, Aero bought out Ballistic Advantage last year.
 
You must log in or register to reply here.
Top Bottom