9mm SBR suppressed FTF last round in magazine

Southeast Traders Apparel Swag Store

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
5.5" barrel running a JP silent spring and an octane 9. Fails to feed the last round of every magazine. 31 rounds run flawlessly then that last round just doesn't quite make it up and into the chamber. My first thought is that it's a magazine issue, but all I currently have is ASC mags for it. Just wanted to see if there were any factors that could cause this, or if there was a known issue with the ASC magazines.
@PewPewPewCo

Oh, and I got the same result with 115gr. and 147gr.
 

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
Are you having the problem with more than one mag? I know the action can get pretty dirty when shooting suppressed and it may be one cause. I had the issue with the M11 on all my sten mags and ended up stretching the springs a little to help. The bolt can't be short stroking as the problem appears to happen whether using full power or reduced power 9mm.

Also, new mags do take some time to break in as well.
 
  • Like
Reactions: Red Dawn

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Are you having the problem with more than one mag? I know the action can get pretty dirty when shooting suppressed and it may be one cause. I had the issue with the M11 on all my sten mags and ended up stretching the springs a little to help. The bolt can't be short stroking as the problem appears to happen whether using full power or reduced power 9mm.

Also, new mags do take some time to break in as well.
I currently only have 3 ASC mags and yes, all three of them did the same thing. She was clean as a whistle and bleeding oil. I plan to add many more mags, but wanted to see if there was a better option out there. When I built it and ordered these availability was extremely limited.
 

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
I currently only have 3 ASC mags and yes, all three of them did the same thing. She was clean as a whistle and bleeding oil. I plan to add many more mags, but wanted to see if there was a better option out there. When I built it and ordered these availability was extremely limited.
I understand that. Hell, if the first 31 rounds run without issue, try just loading 30 rounds and see how it does.
 
  • Like
Reactions: Strider12

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
I understand that. Hell, if the first 31 rounds run without issue, try just loading 30 rounds and see how it does.
Well, after I shoot the first round, the mag is loaded with 31 rounds.;)

I don't think that the problem is that it fails to feed the 32nd round, but that it fails to feed the last round in the mag.
 
  • Like
Reactions: Mac11FA

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
When I bought ASC mags for my AR10 I had to take measurements from some Pmags and break out the Dremel to modify the ASC mags to get them to feed at all. So my first thought was that once again, the ASC mags are junk, but in this case why would 31 rounds feed perfectly and just the last one fail?

I'll just wait for a few different mags to show up at my door and try it again.
 
  • Like
Reactions: Mac11FA

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
When I bought ASC mags for my AR10 I had to take measurements from some Pmags and break out the Dremel to modify the ASC mags to get them to feed at all. So my first thought was that once again, the ASC mags are junk, but in this case why would 31 rounds feed perfectly and just the last one fail?

I'll just wait for a few different mags to show up at my door and try it again.
There are just some mysteries that never get revealed!
 

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
Could be that the bolt is somehow catching the mag's round follower and retarding its momentum. Also, do you have other 9mm buffer setups you could try? I remember folks posting that the JP setup can be finicky.

I would try to cheapest solution first. PSA sells their branded mags which are metalforms and worth every cent of their $25 cost.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
There are just some mysteries that never get revealed!
I'll never let a malfunctioning gun get the better of me. That's how I ended up on the forums to begin with. There's no problem that a little redneck ingenuity and the internets can't solve.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Could be that the bolt is somehow catching the mag's round follower and retarding its momentum. Also, do you have other 9mm buffer setups you could try? I remember folks posting that the JP setup can be finicky.

I would try to cheapest solution first. PSA sells their branded mags which are metalforms and worth every cent of their $25 cost.
I'm gonna get some more mags here ASAP. That's kind of what I was wondering. I built it with the JP and it's the only one I have. If other mags do it, I'll look there next.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Could be that the bolt is somehow catching the mag's round follower and retarding its momentum. Also, do you have other 9mm buffer setups you could try? I remember folks posting that the JP setup can be finicky.

I would try to cheapest solution first. PSA sells their branded mags which are metalforms and worth every cent of their $25 cost.
I swear when I was building and ordering parts I remember reading that PSA mags were ASC. Has something changed or am I making up new memories?
 

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
I swear when I was building and ordering parts I remember reading that PSA mags were ASC. Has something changed or am I making up new memories?

http://palmettostatearmory.com/psa-9mm-smg-magazine.html

States that they are made by Metalform in the description. They are identical - other than the PSA logo - to other Metalform mags that I own (I have both). Sometimes, PSA will have these marked down a buck or two which is a great time to buy en masse.
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
I bought my PSA mags when they hit the market. They did sell ASC mags too maybe but I went with these.

if I recall, when they sold asc mags they were clearly labeled as such
 
Last edited:

rOmiLaYu

Tracker
Trusted Trader
Mar 25, 2015
656
262
113
Earth
Zip code
30132
Could be that the bolt is somehow catching the mag's round follower and retarding its momentum. Also, do you have other 9mm buffer setups you could try? I remember folks posting that the JP setup can be finicky.

I would try to cheapest solution first. PSA sells their branded mags which are metalforms and worth every cent of their $25 cost.
This would be my guess. Something about the follower and the bolt riding it and slowing down. Are there any abnormal wear marks on the follower?
 

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
This would be my guess. Something about the follower and the bolt riding it and slowing down. Are there any abnormal wear marks on the follower?
No, I don't see anything unusual. I'm gonna get a few mags ordered, run it a bit more and see what happens.