Vertical Foregrip on "pistol" question?

Southeast Traders Apparel Swag Store

Blackrifler42

Woodsman
Trusted Trader
Mar 26, 2015
166
84
63
Georgia
Just picked up a Scorpion today and I ordered the Shockwave kit for it. Once I install the kit and it's over 26" in length then I can put a VFG correct?
 

freedom

Sniper
Mar 25, 2015
1,522
885
113
Covington, Ga
Zip code
30014
Just picked up a Scorpion today and I ordered the Shockwave kit for it. Once I install the kit and it's over 26" in length then I can put a VFG correct?

On a AR pistol, definitely. But I don't know if there's a difference between a needed buffer tube and an optional stock kit.
 

Blackrifler42

Woodsman
Trusted Trader
Mar 26, 2015
166
84
63
Georgia
On a AR pistol, definitely. But I don't know if there's a difference between a needed buffer tube and an optional stock kit.

The way I read the rule, as long as it's over 26" you can throw on a VFG. It's just all so damn stupid.....
 

Okuma Steve

Lawnboy
Trusted Trader
Sep 15, 2014
16
-18
63
43
Your answer is here. As long as your pistol currently meets the requirements of being a rifle (16" barrel 26" etc) you can attach a foreward pistol grip and not possess an AOW.
https://www.atf.gov/file/55526/download

You can open it, it's just a PDF newsletter they send FFLs
 

Okuma Steve

Lawnboy
Trusted Trader
Sep 15, 2014
16
-18
63
43
The pertinent part: It's vaque but it says your pistol can become a rifle and then go back:
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has received requests from individuals to classify pistols that are reconfigured into rifles, for personal use, through the addition of barrels, stocks, and other parts and then returned to a pistol configuration by removal of those components. Specifically, ATF has been asked to determine whether such a pistol, once returned to a pistol configuration from a rifle, becomes a “weapon made from a rifle” as defined under the National Firearms Act (NFA). Some manufacturers produce firearm receivers and attachable component parts that are designed to be assembled into both rifles and pistols. The same receiver can accept an interchangeable shoulder stock or pistol grip, and a long (16 or more inches in length) or short (less than 16 inches) barrel. These components are sold individually, or as unassembled kits. Generally, the kits include a receiver, a pistol grip, a pistol barrel less than 16 inches in length, a shoulder stock, and a rifle barrel 16 inches or more in length. - 2 - Certain parts or parts sets are also designed to allow an individual to convert a pistol into a rifle without removing a barrel or attaching a shoulder stock to the pistol. These parts consist of an outer shell with a shoulder stock into which the pistol may be inserted. When inserted, the pistol fires a projectile through a rifled extension barrel that is 16 inches or more in length, and with an overall length of 26 inches or more. Other parts sets require that certain parts of the pistol, such as the pistol barrel and the slide assembly, be removed from the pistol frame prior to attaching the parts sets. Typically, a separate barrel is sold with the parts set, which is 16 inches or greater in length. The barrel is installed along with an accompanying shoulder stock. The resulting firearm has a barrel of 16 inches or more in length, and an overall length of 26 inches or more. The NFA, Title 26, United States Code (U.S.C.), Chapter 53, requires that persons manufacturing, importing, transferring, or possessing firearms as defined in the NFA comply with the Act’s licensing, registration, and taxation requirements. The NFA defines the term “firearm” at 26 U.S.C. 5845(a) to include “(3) a rifle having a barrel or barrels of less than 16 inches in length;” (“short-barreled rifle”) and “(4) a weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length” (“weapon made from a rifle”). The term “rifle” is defined by 26 U.S.C. 5845(c) and 27 CFR 479.11 as “a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger, and shall include any such weapon which may be readily restored to fire a fixed cartridge.” Although not defined in the NFA, the term “pistol” is defined by the Act’s implementing regulations, 27 CFR 479.11, as “a weapon originally designed, made, and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having (a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore(s)”
 

Blackrifler42

Woodsman
Trusted Trader
Mar 26, 2015
166
84
63
Georgia
The pertinent part: It's vaque but it says your pistol can become a rifle and then go back:
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has received requests from individuals to classify pistols that are reconfigured into rifles, for personal use, through the addition of barrels, stocks, and other parts and then returned to a pistol configuration by removal of those components. Specifically, ATF has been asked to determine whether such a pistol, once returned to a pistol configuration from a rifle, becomes a “weapon made from a rifle” as defined under the National Firearms Act (NFA). Some manufacturers produce firearm receivers and attachable component parts that are designed to be assembled into both rifles and pistols. The same receiver can accept an interchangeable shoulder stock or pistol grip, and a long (16 or more inches in length) or short (less than 16 inches) barrel. These components are sold individually, or as unassembled kits. Generally, the kits include a receiver, a pistol grip, a pistol barrel less than 16 inches in length, a shoulder stock, and a rifle barrel 16 inches or more in length. - 2 - Certain parts or parts sets are also designed to allow an individual to convert a pistol into a rifle without removing a barrel or attaching a shoulder stock to the pistol. These parts consist of an outer shell with a shoulder stock into which the pistol may be inserted. When inserted, the pistol fires a projectile through a rifled extension barrel that is 16 inches or more in length, and with an overall length of 26 inches or more. Other parts sets require that certain parts of the pistol, such as the pistol barrel and the slide assembly, be removed from the pistol frame prior to attaching the parts sets. Typically, a separate barrel is sold with the parts set, which is 16 inches or greater in length. The barrel is installed along with an accompanying shoulder stock. The resulting firearm has a barrel of 16 inches or more in length, and an overall length of 26 inches or more. The NFA, Title 26, United States Code (U.S.C.), Chapter 53, requires that persons manufacturing, importing, transferring, or possessing firearms as defined in the NFA comply with the Act’s licensing, registration, and taxation requirements. The NFA defines the term “firearm” at 26 U.S.C. 5845(a) to include “(3) a rifle having a barrel or barrels of less than 16 inches in length;” (“short-barreled rifle”) and “(4) a weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length” (“weapon made from a rifle”). The term “rifle” is defined by 26 U.S.C. 5845(c) and 27 CFR 479.11 as “a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger, and shall include any such weapon which may be readily restored to fire a fixed cartridge.” Although not defined in the NFA, the term “pistol” is defined by the Act’s implementing regulations, 27 CFR 479.11, as “a weapon originally designed, made, and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having (a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore(s)”

Shit....:blah:
 

AirOpsMgr

Director of Lavatory Services
Administrator
Lifetime Supporter
Mar 24, 2015
3,775
10,730
4,294,967,295
30354
The pertinent part: It's vaque but it says your pistol can become a rifle and then go back:
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has received requests from individuals to classify pistols that are reconfigured into rifles, for personal use, through the addition of barrels, stocks, and other parts and then returned to a pistol configuration by removal of those components. Specifically, ATF has been asked to determine whether such a pistol, once returned to a pistol configuration from a rifle, becomes a “weapon made from a rifle” as defined under the National Firearms Act (NFA). Some manufacturers produce firearm receivers and attachable component parts that are designed to be assembled into both rifles and pistols. The same receiver can accept an interchangeable shoulder stock or pistol grip, and a long (16 or more inches in length) or short (less than 16 inches) barrel. These components are sold individually, or as unassembled kits. Generally, the kits include a receiver, a pistol grip, a pistol barrel less than 16 inches in length, a shoulder stock, and a rifle barrel 16 inches or more in length. - 2 - Certain parts or parts sets are also designed to allow an individual to convert a pistol into a rifle without removing a barrel or attaching a shoulder stock to the pistol. These parts consist of an outer shell with a shoulder stock into which the pistol may be inserted. When inserted, the pistol fires a projectile through a rifled extension barrel that is 16 inches or more in length, and with an overall length of 26 inches or more. Other parts sets require that certain parts of the pistol, such as the pistol barrel and the slide assembly, be removed from the pistol frame prior to attaching the parts sets. Typically, a separate barrel is sold with the parts set, which is 16 inches or greater in length. The barrel is installed along with an accompanying shoulder stock. The resulting firearm has a barrel of 16 inches or more in length, and an overall length of 26 inches or more. The NFA, Title 26, United States Code (U.S.C.), Chapter 53, requires that persons manufacturing, importing, transferring, or possessing firearms as defined in the NFA comply with the Act’s licensing, registration, and taxation requirements. The NFA defines the term “firearm” at 26 U.S.C. 5845(a) to include “(3) a rifle having a barrel or barrels of less than 16 inches in length;” (“short-barreled rifle”) and “(4) a weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length” (“weapon made from a rifle”). The term “rifle” is defined by 26 U.S.C. 5845(c) and 27 CFR 479.11 as “a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger, and shall include any such weapon which may be readily restored to fire a fixed cartridge.” Although not defined in the NFA, the term “pistol” is defined by the Act’s implementing regulations, 27 CFR 479.11, as “a weapon originally designed, made, and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having (a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock designed to be gripped by one hand and at an angle to and extending below the line of the bore(s)”
Calling @PewPewPewCo for translation
 

Abishai

Tracker
Kalash Klub
Mar 30, 2015
902
2,616
113
40
GA
Zip code
30705
In for translation, so if you have an AR pistol and it's longer than 26 inches you can do a VFG? AFG is fine whenever?
 

Hayata

Blam-blam-blam-blam-blam-blam-blam-blam-PING!
Kalash Klub
Lifetime Supporter
Jul 5, 2015
6,135
30,134
113
Zip code
30022
This stuff makes my head hurt...