point of milling a pistol slide?

Southeast Traders Apparel Swag Store

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
What is the point of lightening a pistols slide? Head Down here in GA is now doing this to glocks for $400 or you can just straight up buy one for $800. It looks cool to me, but I guess I don't get what the weight reduction cuts do.

DSC_0135.jpg

GLOCK_RX1.png
 

Shemp

Boomerwaffen Fuddmander
Kalash Klub
Lifetime Supporter
Mar 24, 2015
13,835
59,922
1,000,001
Tesseract
Zip code
30152
cycle's faster for competition...supposedly. I would say it's mostly for looks.
 

Shemp

Boomerwaffen Fuddmander
Kalash Klub
Lifetime Supporter
Mar 24, 2015
13,835
59,922
1,000,001
Tesseract
Zip code
30152
Also, pics don't work...at least for me
 
H

Hoss

Guest
One of my instructor busied had his G19 slide opened up with a giant window across the top. He says he can be on target much faster. I am too slow to notice a difference either way so it would be 100% wasted on me.
 

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
What is the point of lightening a pistols slide? Head Down here in GA is now doing this to glocks for $400 or you can just straight up buy one for $800. It looks cool to me, but I guess I don't get what the weight reduction cuts do.

DSC_0135.jpg

GLOCK_RX1.png
Mostly just looks, IMHO. But in certain circumstances could reduce muzzle jump for competitive shooters. I'm not really a fan, just because it would allow easier ingress of dirt or other obstructions. And that example from HDP looks awful. The new Agency Arms pistols are very well executed, but still not for me. I just have a hard time justifying spending as much or more on slide work as you spend on the initial pistol purchase.
 

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
Mostly just looks, IMHO. But in certain circumstances could reduce muzzle jump for competitive shooters. I'm not really a fan, just because it would allow easier ingress of dirt or other obstructions. And that example from HDP looks awful. The new Agency Arms pistols are very well executed, but still not for me. I just have a hard time justifying spending as much or more on slide work as you spend on the initial pistol purchase.
I like agency too, but they are pricier.
 
  • Like
Reactions: DarthVader

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
If the cuts did not penetrate completely through the metal, it would be better IMHO. You would still have the look of a sculpted slide without the complete openings to get FOD into the works.
 
  • Like
Reactions: Cobalt 60

madHatter

Marksman
Mar 25, 2015
1,484
661
113
Fuckville
I think we're just talking about removing material from the slide, not cutting ports into the barrel.
still.... sculpted or engraved... no big deal (cept on a glock.. just like putting lipstick on a pig)

comped or not, you are still going to have that flash.
 

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
You probably experience a little less muzzle flip since you have less mass sliding back and forth.
 

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
You probably experience a little less muzzle flip since you have less mass sliding back and forth.
That's pretty much the idea. But most competitive shooters also handload + swap recoil springs to produce minimum recoil and keep the gun as flat as possible. Lightening the slide alone is really just part of the equation.
 
  • Like
Reactions: Cobalt 60

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
I would think that if you lighten up the slide that you would have to balance it out with a lower power recoil spring.