Howard Law
Mar 16, 2017
6
1
3
Missouri
Zip code
64082
Does anyone else have a problem with the cylinders of their revolvers becoming unbearably hot during extended/rapid fire?

I shoot a S&W m10 (1988) and m15 (1977) in USPSA, so the max rounds is roughly 32 in a single stage. The last match I shot, the cylinder got so hot I nearly dropped the thing, but luckily a string of expletives managed to lessen the pain. That was only ~25 rounds in roughly 60 seconds, with factory 38 special ammunition (125gr magtech)

Would a 357 gun have less of an issue? I assume the stronger chamber walls wouldn't heat up so quickly?
 

Huddy

Tracker
Lifetime Supporter
Jan 5, 2016
564
1,499
113
Cumming, GA
Zip code
30040
The heart of your problem is energy and heat transfer. Generally, .357 rounds have a greater potential energy, but I'd have to research the efficiency of energy transfer to know if the .357 would transfer more/less residual heat energy to the system. My intuition is the .357 would exasperate the issue...but I can't speak from experience. I'm in to hear from anyone that has tried both and observed temperature differences.
 

cmshoot

Marksman
Jul 12, 2016
1,403
1,710
113
Dallas, GA
Zip code
30132
I think what he's asking is if it would be better if he were running .38's in a .357.

I shoot a 625 and it just doesn't get as hot.
 
  • Like
Reactions: Rwjeter

Rwjeter

Space Force General Freeze.
Kalash Klub
Lifetime Supporter
Nov 16, 2016
5,354
10,815
113
Temple
Zip code
30179
The heart of your problem is energy and heat transfer. Generally, .357 rounds have a greater potential energy, but I'd have to research the efficiency of energy transfer to know if the .357 would transfer more/less residual heat energy to the system. My intuition is the .357 would exasperate the issue...but I can't speak from experience. I'm in to hear from anyone that has tried both and observed temperature differences.
Like @cmshoot said, he's asking about shooting a 357 gun. Not 357 rounds. I would think your best bet would be maybe a revolver with a ticker walled cylinder, possible even an unfluted cylinder. It'll be the same principle behind a heavier barrel. It'll take longer to heat up. But it'll also take longer to cool. You also might check into a 7 or 8 shot revolver. That will kinda spread the load. Just my .02.