Extreme Budget 9mm AR Kit Buildup. Will it Run?

Southeast Traders Apparel Swag Store

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
Using the cheapest & least expensive new parts found, I am going to assemble a 9mm AR upper & build kit, then shoot it.
Some of the parts come as a 'combo' buy, like the Shockwave blade, tube & buffer kit. Most components are no-name OEM (unmarked). The upper assembly & LPK are pre-packaged kits. No components are Macon Armory sourced products. Macon Armory Intellectual Property or parts may be applied if difficulties arise.
The main object is to see if this combination of parts, available online here & there for about $475-$485 not including shipping OR the cost of the lower, will work as-is.

Parts List off the top of my head:

Nitrided 9mm barrel
Nitrided 9mm bolt assembly, Glock & Colt compatible
A3 upper (forged? don't know)
Fwd Assist
Charging handle
Standard port door assembly (budget!)
Questionable cheese grater quard rail handguard (a slim keymod would bump the budget another $50-$60!)
Equally questionable muzzle brake
Alleged 'mil-spec' LPK w/ A2 grip (markings or lack of will be noted)
Shockwave Blade kit with tube & hardware
7oz 9mm buffer

Pictures as I progress through the build. Notes on difficulties encountered as I go along.

First look at the whole kit & caboodle:

P_20180105_100520_HDR_1.jpg
 
Last edited:

SouthernSlammed

Gingerbeard Operator
Lifetime Supporter
Aug 29, 2015
3,107
2,616
113
Fapville
Zip code
31061
Awesome! If I didn't have to have pretty on mine, I might have been close to that figure!
 
  • Like
Reactions: Hoss

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
dedicated lower or mag block?

Don't know yet. I have parts on hand for a drop in Colt mag block, but I also have Angstadt lowers on the way.

Its possible that it may run with one type mag & not the other. But the bolt is compatible with Glock or Colt.
 

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020

TattooedGunner

Frontiersman
Mar 31, 2015
491
209
113
Cedartown, GA
Zip code
30125
Definitely going to be watching the progress on this one! I've been interested in a 9mm AR for a while now as a purely fun range toy.
 

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
P_20180105_104955_HDR.jpg Barrel to upper fit is loose. Almost sloppy. Barrel measures .998", upper measures 1.003".

For comparison, a random Aero P upper measures .0998". They run on the tight side of tolerances.

While tightening the brake, the crush washer cracked.
 
  • Like
Reactions: dial1911

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
On a Glock mag lower, 1rst feed & 4th feed looked like this. It will fire & eject if it chambers, which it fails to do 50% right now. P_20180105_113548_HDR_1.jpg
 

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
Well it doesn't feed at all on a Colt pattern lower, the bolt hits the mag feed lips before it ever touches the cartridge. Substituting a R&D(Palmetto, etc) bolt solves going into battery.

Now to test fire with the replacement bolt.