Precision Applications, LLC will be holding an AR builders course on Saturday, April 3, in Powder Springs.
4321 Macland Road
Powder Springs GA
You’ll be able to build an AR from scratch if you wish. You’ll have to source all the parts you need before the course, and I’m glad to help with this.
You can just watch and take notes.
You can do just the work that you need to do.
You can tear all or part of an AR apart, for inspection and/or reassembly.
The curriculum will be flexible, and we should be able to fit your needs.
The course would be blocked for 8 hours, at a cost of $250. Class is limited to 16 students, and full payment is required before your slot is reserved.
For folks that have signed up, I will contact you about what you plan on doing during the course, and recommending tools and supplies.
Topics covered will include, but may not be limited to:
-Tools and supplies that are necessary for a proper job
-Building a complete lower
-Building a complete upper
-In depth coverage of BCG's, gas systems (ports, tubes, lengths, blocks, etc.), buffer systems, and more
-How to "set up" an AR properly for your intended use, which will include discussions of optics, slings, lights, etc.