Econ Sears is 'set to sink'

American Revival Apparel Company

00formula6spd

Frontiersman
Jul 13, 2015
414
401
113
Lilburn Ga.
Zip code
30047
Stanley is like the Freedom Group of tools
  • 1937: Stanley Works entered the UK market with the acquisition of J.A Chapman of Sheffield, England.[8]
  • 1946: Stanley Works acquired North Brothers Manufacturing Company.[9]
  • 1963: Stanley started operations in Australia as Stanley-Titan when it bought a 50% share of Titan, a subsidiary of BHP.[10]
  • 1966: Stanley Works acquired Vidmar Cabinets.[11]
  • 1970: Stanley-Titan acquired Turner Tools based in Melbourne, Australia.[12]
  • 1980: Stanley Works acquired Mac Tools.[8][13]
  • 1984: Stanley Works purchased Proto from Ingersoll Rand and it becomes Stanley Proto.[14]
  • 1986: Stanley Works acquired Bostitch from Textron.[15]
  • 1990: Stanley Works acquired Goldblatt[8][13] and ZAG Industries.[13]
  • 1990: Acquired Sidchrome Tool Co., headquartered in Melbourne, Australia; closed plant in 1996 and started to move all tool manufacturing to Taiwan, whilist sourcing various items from Proto in the USA (marked as Proto on items) due to short supply of left over Australian made tools being sold out until all manufacturing was up to speed in Taiwan.
  • 1992: Stanley Works purchased the Chatsworth, California-based Monarch Mirror Door Co. Inc., an American manufacturer of sliding and folding mirror-doors.
  • 2000: Stanley Works acquired Blick of Swindon, England,[8][13] a UK integrator of security solutions, communication, and time-management solutions, and CST Berger.[8][13]
  • 2002: In October, Stanley Works acquired Best Access Systems of Indianapolis, Indiana, for $310 million. The acquisition also prompted the creation of a new Access Controls Group for Stanley. Further additions to this new working group included Blick.
  • 2004: In January, Stanley announced plans to acquire Frisco Bay Industries Ltd., a Canadian provider of security integration services, for $45.3 million. In December, the acquisition of ISR Solutions, Inc., headquartered in Washington, D.C., was announced. ISR Solutions provides the U.S. federal government and commercial customers with access security system services.
  • 2005: In January, the acquisition of Security Group, Inc. was announced. Security Group was composed of two primary operating companies: Sargent & Greenleaf, Inc., a manufacturer of locks; and Safemasters, a North American provider of security installation, maintenance and repair services. An additional acquisition of Precision Hardware was made in 2005.
  • 2006: Stanley furthered its corporate assets in the security market by acquiring HSM Electronic Protection Systems after it had been spun off from Honeywell in compliance with pre-emptive Securities and Exchange Commission antitrust rulings. In the meantime, the company obtained security contracts as the primary contractor to secure three NASA spaceflight centers.[16] Stanley Works also acquired Facom'.[8][13]
  • 2007: Late in the year, Stanley acquired OSI Security of Chula Vista, California, a provider of battery-operated wireless lock technology and supplies to government, education, and healthcare industries.
  • 2008: Stanley acquired Beach Toolbox Industries, headquartered in Smith Falls, Ontario, Canada, then closed the plant.
  • 2008: In June, Stanley announced the acquisition of Sonitrol, which provides security systems that use audio listening devices as the primary means of intrusion detection. Stanley also acquired Xmark Corporation, which provides radio frequency identification (RFID) solutions in healthcare environments. As of 2008, many of the Stanley Security Services divisions were being integrated under the HSM brand.
  • 2009: On November 2, Stanley announced a merger with Black & Decker.[17] The merger was completed on March 12, 2010.[18]
  • 2010: In July, the company announced the acquisition of CRC-Evans Pipeline International.[19] CRC-Evans provides total project support for pipeline construction contractors with automatic welding and other pipeline construction specific equipment and personnel.
  • 2011: On September 9, the acquisition of Niscayah was complete.
  • 2012: On January 1, the acquisition of Lista North America, headquartered in Holliston, Massachusetts, was completed.[20]
  • 2012: On June 1, the acquisition of Powers Fasterners, headquartered in Brewster, New York, was completed.[21]
  • 2012: On June 5, the acquisition of AeroScout, Inc., headquartered in Redwood City, California, was completed.[22]
  • 2016: Stanley Black & Decker announced in October that it acquired the Irwin, Lenox, Hilmor, and Dymo tool brands for $1.95 billion from Newell Brands.[23]
  • 2017: On January 5, news reports indicated that it would acquire the Craftsman brand from KCD, LLC (A Sears Holdings subsidiary).[24] Subsequent reports by Bloomberg indicated that the company would pay $525 million initially, an additional $250 million after three years, as well as annual payments on new Craftsman sales for 15 years.[25]
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
Stanley is like the Freedom Group of tools
  • 1937: Stanley Works entered the UK market with the acquisition of J.A Chapman of Sheffield, England.[8]
  • 1946: Stanley Works acquired North Brothers Manufacturing Company.[9]
  • 1963: Stanley started operations in Australia as Stanley-Titan when it bought a 50% share of Titan, a subsidiary of BHP.[10]
  • 1966: Stanley Works acquired Vidmar Cabinets.[11]
  • 1970: Stanley-Titan acquired Turner Tools based in Melbourne, Australia.[12]
  • 1980: Stanley Works acquired Mac Tools.[8][13]
  • 1984: Stanley Works purchased Proto from Ingersoll Rand and it becomes Stanley Proto.[14]
  • 1986: Stanley Works acquired Bostitch from Textron.[15]
  • 1990: Stanley Works acquired Goldblatt[8][13] and ZAG Industries.[13]
  • 1990: Acquired Sidchrome Tool Co., headquartered in Melbourne, Australia; closed plant in 1996 and started to move all tool manufacturing to Taiwan, whilist sourcing various items from Proto in the USA (marked as Proto on items) due to short supply of left over Australian made tools being sold out until all manufacturing was up to speed in Taiwan.
  • 1992: Stanley Works purchased the Chatsworth, California-based Monarch Mirror Door Co. Inc., an American manufacturer of sliding and folding mirror-doors.
  • 2000: Stanley Works acquired Blick of Swindon, England,[8][13] a UK integrator of security solutions, communication, and time-management solutions, and CST Berger.[8][13]
  • 2002: In October, Stanley Works acquired Best Access Systems of Indianapolis, Indiana, for $310 million. The acquisition also prompted the creation of a new Access Controls Group for Stanley. Further additions to this new working group included Blick.
  • 2004: In January, Stanley announced plans to acquire Frisco Bay Industries Ltd., a Canadian provider of security integration services, for $45.3 million. In December, the acquisition of ISR Solutions, Inc., headquartered in Washington, D.C., was announced. ISR Solutions provides the U.S. federal government and commercial customers with access security system services.
  • 2005: In January, the acquisition of Security Group, Inc. was announced. Security Group was composed of two primary operating companies: Sargent & Greenleaf, Inc., a manufacturer of locks; and Safemasters, a North American provider of security installation, maintenance and repair services. An additional acquisition of Precision Hardware was made in 2005.
  • 2006: Stanley furthered its corporate assets in the security market by acquiring HSM Electronic Protection Systems after it had been spun off from Honeywell in compliance with pre-emptive Securities and Exchange Commission antitrust rulings. In the meantime, the company obtained security contracts as the primary contractor to secure three NASA spaceflight centers.[16] Stanley Works also acquired Facom'.[8][13]
  • 2007: Late in the year, Stanley acquired OSI Security of Chula Vista, California, a provider of battery-operated wireless lock technology and supplies to government, education, and healthcare industries.
  • 2008: Stanley acquired Beach Toolbox Industries, headquartered in Smith Falls, Ontario, Canada, then closed the plant.
  • 2008: In June, Stanley announced the acquisition of Sonitrol, which provides security systems that use audio listening devices as the primary means of intrusion detection. Stanley also acquired Xmark Corporation, which provides radio frequency identification (RFID) solutions in healthcare environments. As of 2008, many of the Stanley Security Services divisions were being integrated under the HSM brand.
  • 2009: On November 2, Stanley announced a merger with Black & Decker.[17] The merger was completed on March 12, 2010.[18]
  • 2010: In July, the company announced the acquisition of CRC-Evans Pipeline International.[19] CRC-Evans provides total project support for pipeline construction contractors with automatic welding and other pipeline construction specific equipment and personnel.
  • 2011: On September 9, the acquisition of Niscayah was complete.
  • 2012: On January 1, the acquisition of Lista North America, headquartered in Holliston, Massachusetts, was completed.[20]
  • 2012: On June 1, the acquisition of Powers Fasterners, headquartered in Brewster, New York, was completed.[21]
  • 2012: On June 5, the acquisition of AeroScout, Inc., headquartered in Redwood City, California, was completed.[22]
  • 2016: Stanley Black & Decker announced in October that it acquired the Irwin, Lenox, Hilmor, and Dymo tool brands for $1.95 billion from Newell Brands.[23]
  • 2017: On January 5, news reports indicated that it would acquire the Craftsman brand from KCD, LLC (A Sears Holdings subsidiary).[24] Subsequent reports by Bloomberg indicated that the company would pay $525 million initially, an additional $250 million after three years, as well as annual payments on new Craftsman sales for 15 years.[25]
Good God- they have already bought most of the "names" I've trusted. Damn- I always thought Whack and Pecker had gone away. Clearly not... I can't believe the Irwin saw blades I've been buying were funneling money back to B&D (and apparently Stanley).

What's in a name anymore.
 
  • Like
Reactions: EugenFJR

Willy Leadwell

Purveyor of Polyurethane
Lifetime Supporter
Mar 26, 2015
2,159
1,679
113
Loganville, GA
Zip code
30052
Mac air tools were Ingersol Rand built to MAC specs back in the day. Stanley owns them also.
Ingersoll rand is junk if you're buying anything less than their expensive, American made industrial stuff. All of their air tools and compressors less than 20hp are pure garbage.
 

dial1911

Waiting for the flash
Site Supporter
Jul 15, 2015
7,331
27,066
113
Anywhere but here
southeastoutdoors.boards.net
I bought some Blackhawk wrenches off the Mac truck years ago for the house. They were good to go.

I don't use most of my hand tools on a day to day basis- but when I need them to work, I do expect them to be up to the job. Most of the combination wrenches I have are Craftsman with some other stuff mixed in. No failures to speak of, but I did buy the dang things (at least partially) because of the warranty. As the ones I have break, I will be looking for replacements. Something other than the brands on the list above.
 

00formula6spd

Frontiersman
Jul 13, 2015
414
401
113
Lilburn Ga.
Zip code
30047
Blackhawk, Stanley wrenches are kind of like Bluepoint. Bluepoint is farmed out to meet Snap-On specs. Snap- On last I heard still makes their own. ( I retired in 2013) so have not kept up.
 

00formula6spd

Frontiersman
Jul 13, 2015
414
401
113
Lilburn Ga.
Zip code
30047
I don't use most of my hand tools on a day to day basis- but when I need them to work, I do expect them to be up to the job. Most of the combination wrenches I have are Craftsman with some other stuff mixed in. No failures to speak of, but I did buy the dang things (at least partially) because of the warranty. As the ones I have break, I will be looking for replacements. Something other than the brands on the list above.
With Snap-on and Mac, the tolerances are alot tighter. Snap-On has a good Flank drive also. Its the small things.
 
  • Like
Reactions: dial1911

EugenFJR

An anchor on a ship of fools.
Kalash Klub
Lifetime Supporter
Jul 3, 2015
4,564
16,321
113
Your mom's house
Zip code
90210
Good God- they have already bought most of the "names" I've trusted. Damn- I always thought Whack and Pecker had gone away. Clearly not... I can't believe the Irwin saw blades I've been buying were funneling money back to B&D (and apparently Stanley).

What's in a name anymore.


LOL !!! At "Wack and Pecker"....

I'm not a tool operator, but my Ryobi stuff has been pretty good, esp. the 18v batteries on their tools...
My Buddy uses Bosch tools all the the time, and that seems to be pretty good shit.
 
  • Like
Reactions: dial1911

AtlMedic

Not A Doctor
Mar 25, 2015
2,644
1,441
113
Smyrna, GA
Zip code
30082
Blackhawk, Stanley wrenches are kind of like Bluepoint. Bluepoint is farmed out to meet Snap-On specs. Snap- On last I heard still makes their own. ( I retired in 2013) so have not kept up.
I've been very happy with my blue point socket sets I got years ago. I used them professionally for several years and never had any issues. I think they are good for the average person who can't justify snap on money for home project tools.
 
  • Like
Reactions: 00formula6spd