Best/Favorite Hunting Load for 300BLK?

Preparedness Depot in Acworth, GA

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
Looking at using the Barnes Vor-tx 110gr copper solid or the Federal 120gr Copper solid for pigs this year. So far I just have a supply of the Federal load (about half the price as the Barnes).

Any other good options? I want to stick with supersonic..there's some big ol' pigs on this ranch and I don't feel comfortable using subs.

Can't wait until 300Blk gets a bit cheaper..sheesh.
 
  • Like
Reactions: DoglegArms

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
Nosler. I've really come to like their hunting projectiles.

I am trying some Bergers this year to find the magical bang flop high shoulder every time. With that disclaimer out of the way, Nosler Ballistic Tips expand over an incredible velocity range. You can shoot the same bullet in a 300 Win Mag, or a .308. Noslers fly like match bullets, and are easy to load.

In for 300 blk info.
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
If I were shooting that caliber, I would cast some dead soft lead, gas-checked hollow point projectiles, or hollow point them after the fact. Then powder coat the entire bearing surface, leaving the nose uncoated soft lead. Nothing is going to expand better than soft lead. Being low velocity and monolithic, I would expect the bottom 1/2 to stay intact. Wheel weights have held together for me at 30-30 velocity. These would probably have to be single fed first shots to avoid damage to the nose in an ar. Capture+_2018-10-15-19-02-17.png

If you buy a mold, I will be happy to cast you some hard and soft.
 
  • Like
Reactions: Laufen

ReservoirDawg10

Sniper
Site Supporter
Apr 10, 2016
1,655
1,571
113
Gwinnett
Zip code
30519
If I were shooting that caliber, I would cast some dead soft lead, gas-checked hollow point projectiles, or hollow point them after the fact. Then powder coat the entire bearing surface, leaving the nose uncoated soft lead. Nothing is going to expand better than soft lead. Being low velocity and monolithic, I would expect the bottom 1/2 to stay intact. Wheel weights have held together for me at 30-30 velocity. These would probably have to be single fed first shots to avoid damage to the nose in an ar. View attachment 43562

If you buy a mold, I will be happy to cast you some hard and soft.
Agreed, but would need to be very soft/nearly pure lead. Either out of a sailboat or from 22 boolits. Did the same with a 44 mag, 300 grain projectiles, running 1050 and wheel weight lead wasn't soft enough to open up like desired.
 
  • Like
Reactions: Liberty

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
the barnes vor-thx or the hornady sst should do the trick. i’ve yet to try a deer with 300 but the comparable loads in 6.8 spc worked well.
 
  • Like
Reactions: Laufen

Cudruln

Turning dollars into pennies.
Lifetime Supporter
Jul 5, 2015
4,337
4,579
113
Rockmart, GA
Zip code
30153
Not trying to hijack. But I have been debating on the 300blk for deer this year. Obviously the loads @Laufen suggested would work for deer! Are there any subsonic loads that would also work for deer?
 
  • Like
Reactions: Laufen

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
Not trying to hijack. But I have been debating on the 300blk for deer this year. Obviously the loads @Laufen suggested would work for deer! Are there any subsonic loads that would also work for deer?
Maybe the underwood 194 maximum expansion.
 
  • Like
Reactions: Cudruln

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
Agreed, but would need to be very soft/nearly pure lead. Either out of a sailboat or from 22 boolits. Did the same with a 44 mag, 300 grain projectiles, running 1050 and wheel weight lead wasn't soft enough to open up like desired.

I agree that wheel weights would not expand sufficiently at typical handgun speeds. There is no way that I would shoot a traditional jacketed rifle bullet at a deer under 2000 fps m.v. At 1800 or 2000 fps the wheel weights might expand, but soft cast would be where I started as well.
Capture+_2018-10-15-20-59-02.png
 

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
Not doing any hand loading. Just buying ammo off the shelf like a noob.
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
Not doing any hand loading. Just buying ammo off the shelf like a noob.

It's like craft beer for your guns shooting fine handloads. I feel so sorry for those poor rifles, the way you give them Budweiser and Coors Light. They must cry on the inside the way you treat them so cheap. You might as well name the 300 blackout Stormy, and the .223 Daniels.
 

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
It's like craft beer for your guns shooting fine handloads. I feel so sorry for those poor rifles, the way you give them Budweiser and Coors Light. They must cry on the inside the way you treat them so cheap. You might as well name the 300 blackout Stormy, and the .223 Daniels.
My guns are knuckle dragging Neanderthals. They can’t appreciate good ammo.
 

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
It's like craft beer for your guns shooting fine handloads. I feel so sorry for those poor rifles, the way you give them Budweiser and Coors Light. They must cry on the inside the way you treat them so cheap. You might as well name the 300 blackout Stormy, and the .223 Daniels.

i would like to reload but don’t have the time
 

lesptr

Ninja
Kalash Klub
Lifetime Supporter
Mar 7, 2018
9,150
46,119
113
Newnan, GA
Zip code
30263
I’ve been loading 9, 45, 38, and 32 for a while with great results. 300BLK is the only rifle round I’ve attempted, and it’s been an exercise in frustration. I get better groups from cheap plinking ammo. Maybe my micro 7 just doesn’t like 125 gn Sierra match kings, but I’ve not tried anything else.
 
  • Like
Reactions: Laufen

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
I’ve been loading 9, 45, 38, and 32 for a while with great results. 300BLK is the only rifle round I’ve attempted, and it’s been an exercise in frustration. I get better groups from cheap plinking ammo. Maybe my micro 7 just doesn’t like 125 gn Sierra match kings, but I’ve not tried anything else.

What factory load does it shoot best?
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
And we have a tremendous variety of relatively cheap, and specialized ammo available off the shelf.

I get it and was of course joking with you. I would probably shoot a 125 loaded with a Nosler if I was shooting factory supersonic.
 
  • Like
Reactions: Laufen