Jeep TJ tube buggy for sale

Faktory 47

Piros1

Scout
Oct 12, 2018
3
1
3
70
Dittmer
I have a custom built tube buggy with a 2005 LQ4 6.0 liter Chevy engine that I have no idea of the exact miles or run hours it has on it but was told when it came out of the donor truck it supposedly had 46,000 miles so relatively low mileage engine. I do know that the rig has less than 70 hours on it since it was built based on the hour meter in the rig. I have always ran Royal Purple synthetic oil. I do have a 3 quart accumulater installed with a manual valve under the dash. Art Carr turbo 400 with a reverse manual valve body, Art Carr shifter and torque converter, Atlas 2 transfer case, high pinion Dynatrac 60 with up front and GM 14 bolt rear, both with 5.38 gears, Detroit lockers, alloy axles, 8 on 6.5" bolt pattern, front has CTM joints and Solid brand axle flanges, Dynatrac differential covers on both axles. 16" Fox coil overs all four corners with Eibach springs, 3” Fox hydraulic bump stops, 17"x10" StazWorks 3 piece wheels, 43/17.50-17" sticky tires, Corbeau seats, 5 point harnesses, PSE full hydraulic steering, Ron Davis 2 stage radiator, triangulated four link rear, and three link front. There is a lot more just to many build items to list. I have a folder full of build items. I'm 63 and just don't have enough time to make use of it and don't have the room to store it. Everything works and the rig runs great. It has never been flipped on its lid or side and has not been run as hard as it should be. This rig is more capable than I am of driving it. I have many photos I can add or send, just let me know. At this time the winch in the photos is not included in the price.

Asking price $38,500.00.
Reasonable offers considered.


Sent from my iPhone using Tapatalk
 

Piros1

Scout
Oct 12, 2018
3
1
3
70
Dittmer
I have a custom built tube buggy with a 2005 LQ4 6.0 liter Chevy engine that I have no idea of the exact miles or run hours it has on it but was told when it came out of the donor truck it supposedly had 46,000 miles so relatively low mileage engine. I do know that the rig has less than 70 hours on it since it was built based on the hour meter in the rig. I have always ran Royal Purple synthetic oil. I do have a 3 quart accumulater installed with a manual valve under the dash. Art Carr turbo 400 with a reverse manual valve body, Art Carr shifter and torque converter, Atlas 2 transfer case, high pinion Dynatrac 60 with up front and GM 14 bolt rear, both with 5.38 gears, Detroit lockers, alloy axles, 8 on 6.5" bolt pattern, front has CTM joints and Solid brand axle flanges, Dynatrac differential covers on both axles. 16" Fox coil overs all four corners with Eibach springs, 3” Fox hydraulic bump stops, 17"x10" StazWorks 3 piece wheels, 43/17.50-17" sticky tires, Corbeau seats, 5 point harnesses, PSE full hydraulic steering, Ron Davis 2 stage radiator, triangulated four link rear, and three link front. There is a lot more just to many build items to list. I have a folder full of build items. I'm 63 and just don't have enough time to make use of it and don't have the room to store it. Everything works and the rig runs great. It has never been flipped on its lid or side and has not been run as hard as it should be. This rig is more capable than I am of driving it. I have many photos I can add or send, just let me know. At this time the winch in the photos is not included in the price.

Asking price $38,500.00.
Reasonable offers considered.


Sent from my iPhone using Tapatalk

195004081783a433663816a271cc2160.jpg
e13fe54c4cbcd7fd60b80201c9d754f0.jpg
036a74d29637959b76d317f2c882c6ac.jpg


19e46c31568671eb29ad4220feac8202.jpg




Sent from my iPhone using Tapatalk
 
  • Like
Reactions: dial1911