Coin Ring

Howard Law

2Glocks

Ain’t gonna roll over
Site Supporter
Kalash Klub
Aug 30, 2019
6,596
37,811
113
30534
Zip code
30188
More cheap adventures from 2Glocks.

I don't like wearing my fancy wedding ring around the farm since i'm terrified it's going to disappear into a pile of animal excrement. I was wearing the silicon rings for a while but they don't last that long. I saw a dude one time making rings out of coins and so I decided to take a crack at it. Took about 1.5 hours overall, would have been a lot faster if I had a step bit to drill out the finger hole.

Aquire coin. This half dollar is the perfect size.
1608049742252.png

Start banging on that bitch with even pressure with a hammer and something hard underneath. This will start rolling out the out edge so you dont have a skinny ass ring
1608049805041.png

Keep bangin
1608049831250.png

Heres the outer edge now:
1608049855351.png

I didn't have a step bit or a normal bit the right size so i drilled out a few pilot holes and got to work with a round file
1608049987673.png

Finished product
1608049913079.png

Thanks fer watching. I need some silver half dollars to do this with if anyone has a few they want to sell me
 

erkinator

Smiling Handyman
Lifetime Supporter
Jul 1, 2015
6,011
7,162
113
Zip code
30513
More cheap adventures from 2Glocks.

I don't like wearing my fancy wedding ring around the farm since i'm terrified it's going to disappear into a pile of animal excrement. I was wearing the silicon rings for a while but they don't last that long. I saw a dude one time making rings out of coins and so I decided to take a crack at it. Took about 1.5 hours overall, would have been a lot faster if I had a step bit to drill out the finger hole.

Aquire coin. This half dollar is the perfect size.
View attachment 110226

Start banging on that bitch with even pressure with a hammer and something hard underneath. This will start rolling out the out edge so you dont have a skinny ass ring
View attachment 110227

Keep bangin
View attachment 110228

Heres the outer edge now:
View attachment 110229

I didn't have a step bit or a normal bit the right size so i drilled out a few pilot holes and got to work with a round file
View attachment 110232

Finished product
View attachment 110231

Thanks fer watching. I need some silver half dollars to do this with if anyone has a few they want to sell me


OMG you defaced currency,I`m not sure I can hang around a criminal now.
 

erkinator

Smiling Handyman
Lifetime Supporter
Jul 1, 2015
6,011
7,162
113
Zip code
30513
More cheap adventures from 2Glocks.

I don't like wearing my fancy wedding ring around the farm since i'm terrified it's going to disappear into a pile of animal excrement. I was wearing the silicon rings for a while but they don't last that long. I saw a dude one time making rings out of coins and so I decided to take a crack at it. Took about 1.5 hours overall, would have been a lot faster if I had a step bit to drill out the finger hole.

Aquire coin. This half dollar is the perfect size.
View attachment 110226

Start banging on that bitch with even pressure with a hammer and something hard underneath. This will start rolling out the out edge so you dont have a skinny ass ring
View attachment 110227

Keep bangin
View attachment 110228

Heres the outer edge now:
View attachment 110229

I didn't have a step bit or a normal bit the right size so i drilled out a few pilot holes and got to work with a round file
View attachment 110232

Finished product
View attachment 110231

Thanks fer watching. I need some silver half dollars to do this with if anyone has a few they want to sell me


I looked through all my half dollars,bust. Thought I had one or 2. Nothing before 67
 
  • Like
Reactions: dial1911

Hoss

International Man of Pallor
Administrator
Lifetime Supporter
Apr 11, 2019
14,382
21,127
213
Monticello
Zip code
31064
Hmmm... let me see what weird coins I have. I might try this tomorrow. I’m off for milk day.